Abrasion tester APG 1000

The APG 1000 enables the flocking quality to be checked. Based on many years of experience, the abrasion tester was developed to create defined and reproducible conditions

You need to register here before you can buy any products.

Product description

The APG 1000 abrasion tester is used to assess the quality of the flocked products. The speed as well as the number and length of strokes are individually adjustable. In addition, the APG 1000 is suitable for testing the abrasion resistance of leather and lacquered plastic surfaces. The abrasion intensity of a sample is determined by an abrasion test. The abrasion is caused by the pressure of the test chisel and the lateral movement under the test chisel on the sample. For this purpose, the sample to be tested is fixed on the lifting carriage and the test chisel is pressed onto the sample by a defined differential weight. Maag Flock offers a wide range of test gouges, from standard test gouges to standardized and individual special test gouges. With special additional equipment, the abrasion tests can be carried out in accordance with their specification; the APG 1000 must be converted accordingly. The following tests are already integrated in the additional devices:
Sliding varnish tests:
The add-on for the sliding varnish tests is available for the APG 1000 and is fixed with the angle or flat plate.
Scratch tests according to Din-ISO-EN 105×12
The APG 1000 can be converted for scratch testing with the additional set. The required conversion is carried out by Maag Flock and can be individualised to your requirements.

Scope of delivery:
Basic device
Device housing to accommodate the drive motor, the stroke adjustment and the electrical device with on/off switch, indicator light, adjustable counter switch with reset, total counter with reset, stroke adjustment from 20 - 100 mm
Lifting carriage with clamping device for the material samples, easily swivelling bridge for the chisel holder, including a weight load of 250 g, lifting speed of the carriage continuously adjustable
Support by glass plate

Accessories

Transformer: ballast transformer 110/220 V, 750 VA, export version according to UL, multiple socket included

Accessories for various testing purposes:

  • Standard abrasion chisels and weights, suitable for testing rigid and flexible, flat materials
  • Standard, 20 mm wide, r= 0.16 mm
  • Standard, 20 mm wide, r= 0.5 mm
  • Standard, 2.8 mm wide, r=0.5 mm
  • Specimen holder for standard chisel, 22 mm
  • Additional weight for 0.5 kg load
  • Additional weight for 1.0 kg load
  • Additional weight for 1.5 kg load
  • Additional weight for 2.0 kg load
  • Clamping weight for flexible materials 1.0 kg incl. substrate base rubber

Abrasion chisels and accessories for testing profiles according to the regulations of the individual automobile manufacturers:
BMW:

  • BMW chisel B8 8.0 mm wide, r= 0.5 mm
  • Specimen holder for BMW chisel, 18 mm wide
  • Attachment Abrasion over disc edge, incl. textile tension rope weight 306 g
  • BMW fingernail test according to PR307.4
  • Chisel holder for PMMA fingernail, longitudinal
  • Chisel holder for PMMA fingernail, t.s.
  • PMMA fingernail for fingernail test
  • Additional weight for 15 N load

Daimler

  • Daimler chisel, 8.0 mm wide, r= 0.16 mm
  • Specimen holder for Daimler chisel, 9 mm wide
  • Felt chisel acc. to DBL 7384
  • Attachment scuff test for Daimler (DBL 5578), incl. weight 1.0 kg
  • Attachment Abrasion over disc edge, incl. textile tension rope weight, 306 g for Daimler (DBL 5578, item 16)
  • Change test APG 1000 for scratch test, acc. to DBL 5306 p.4 + DIN/EN/ISO 105-X12 consisting of: swap body, chisel, ramps, additional weight

FIAT

  • FIAT test chisel "Bit F", 8.0 mm wide, r= 0.17 mm
  • FIAT test chisel "Bit V", 9.0 mm wide, r= 5.0 mm
  • FIAT test chisel "7M30005", 2.5 mm wide, r= 0.2 mm

Mitsubishi

  • Mitsubishi chisel 4/2, r= 0.16 mm
  • Mitsubishi chisel, 1.6 mm wide f. ES-X30380
  • Mitsubishi chisel with pin, d= 1.2 mm, r= 0.3 mm for ES-X60210
  • Mitsubishi chisel, 20 mm wide, r= 45 mm, incl. clamping spring for ES-X60210

Nedcar/VOLVO

  • Nedcar/VOLVO chisel 7.9 mm

Opel (General Motors)

  • Opel (GM) chisel, 5 mm wide, r= 0.25 mm
  • Specimen holder for Opel (GM) chisel, 6 mm wide
  • Additional weight for 0.5 kg load
  • Opel (GM) chisel, 10 mm wide, r= 0.25 mm
  • Specimen holder Opel (GM) chisel, 11 mm wide
  • Additional weight for 1.0 kg load
  • Attachment scuff test for General Motors (GMW16953), incl. weight 1.0 kg

Renault

  • Renault chisel, 10 mm wide, r= 0.2 mm
  • Specimen holder for Renault chisel 11 mm wide
  • Additional weight for 0.775 kg load
  • Renault chisel according to standard D44-1221/C for pianosaite d= 0.45 mm design, 17 mm wide
  • Renault chisel according to standard D24-1724 for piano strings, d= 0.45 mm design, 20 mm wide
  • Renault chisel according to standard D44-1900/C for pianosaite, d= 0.45 mm design, 22 mm wide
  • Pianosaite, d= 0,45 mm suitable for Renault chisel according to standard D24-1724/-B Price rdm. Meter
  • Changing bridge set Renault + PSA chisel according to standard D24-1724 (total weight 200g) consisting of: Changing bridge for APG 1000, chisel, chisel holder incl. knurled screw, lifting plate, material: Tiat

Suzuki

  • Suzuki glass chisel & chisel holder R2-corners, r= 0,5 edge with 20 mm/3,5 mm thick, incl. weight 30 N
  • Replacement glass chisel (glass only) for Suzuki glass chisel system R2-corners, r= 0,5 mm edge with 200 mm/ 3,5 mm thick

VW

  • VM chisel, 2.8 mm wide, r= 0.16 mm
  • VW chisel, 3.0 mm wide, r= 0.16 mm
  • Specimen holder for VM chisel, 4.0 mm wide
  • VW chisel, 5.0 mm wide, r= 0.16 mm
  • Specimen holder for VW chisel, 6 mm wide
  • Additional weight for 0.325 kg load
  • VW chisel, 7.9 mm wide, r= 0.16 mm
  • Specimen holder for VW chisel, 9.0 mm wide
  • Additional weight for 0.5 kg load
  • Mounting scuff test for VW (VW50129) and Porsche (PTL4060), incl. weight 1,0 kg
  • Attachment Abrasion over disc edge incl. textile tension rope weight for VW (VW50129, item 3.13) 306g, for Audi (LV28) 306g, for Porsche (PTL4060) 300 g

Round punch/ Crockmeter chisel

  • Round punch CR22 with pendulum joint, r= 22 mm, according to test standard AA-0134 BMW
  • Additional weight for 9 N load for round punch CR22 with pendulum joint, stainless steel
  • Round punch type CR16, d= 16 mm, r= 0,16 mm , incl. clamping spring
  • Specimen holder for round punch type CR16, 18 mm wide
  • Additional weight for 9 N load
  • Additional weight for 900 g load
  • Replacement clamping spring for round punch type CR16, d= 16 mm
  • Round punch type CR8, d= 8 mm, r= 0.16 mm, incl. clamping spring
  • Specimen holder for round punch CR8, 9.0 mm wide
  • Replacement clamping spring for round punch type CR8, d= 8.0 mm
  • Round punch type GL 6/8, d= 8.0 mm, bearing surface d= 6.0 mm, incl. clamping spring
  • Specimen holder for round punch GL 6/8, 9.0 mm wide
  • Rubbing fastness fabric for Crockmeter, blanks 5×5 cm, packing unit 1000 pieces for DIN EN ISO 105-X12

Pad holder

  • Pad holder B10x10 + 2x r= 2,5 mm
  • Pad holder B20, r= 2.5 mm
  • Pad holder B20, r= 5.0 mm

 

Click here & view flyer!

Additional information

Art

APG 1000, APG 1003, APG 1004

Abrasion tester APG 1000

Category

These products might also interest you:

Often bought together: