The hot-melt adhesive is filled into the MT 501 casting moulds in order to clamp them in the MT 501 for the pull-out test.
Moulds MT 501
The hot-melt adhesive is filled into the MT 501 casting moulds on the rubber tray with the aid of a hot-melt glue gun. The casting moulds are then clamped with the plates and the clamping device in the motor-driven tear-out test stand and the tear-out test is carried out.
The moulds are available in different diameters:
Size | 5 mm, 6 mm, 7 mm, 8 mm, 10 mm |
---|