SWAP flocking dryer

SWAP flocking dryer

The flocking dryer for SWAPs is used to dry the flocked workpieces after flocking.

• Designed for a drying time of 24 minutes at a temperature of 120 °C.
• Can be used for drying solvent adhesives.
• The continuous dryer is electrically operated, with circulating air of 1,500 m3/h and exhaust air up to a maximum of 900 m3/h.
• Conveyor belt width 1100 mm
• Passage height from top edge of conveyor system to floor 900 mm
• Transport speed conveyor belt adjustable between 0.1 - 0.5 m/min
• Inlet area 1,200 mm
• Hot air zone 8,000 mm
• Outlet 900 mm
• Total length 10,100 mm
• Flock filter in the recirculation air flow, filter elements can be removed from the side
• Maximum heating air temperature 180 °C
• Connection 400 V 3 PEN 50 Hz
• Power connection Power operation approx. 70 kW
• Power connection Heating phase approx. 139 kW
• Compressed air 20 Nl/h, 6 bar ( dry, oil-free )
• Total width 2,000 mm (plus 1,000 mm on both sides for maintenance)